UHS High-Quality Polish (less odour)
Packages : 3.75 L (1 gallon) / 18.75 L (5
gallon)
Applications : UHS polish for astile, ceramic
tile, urethane tile, epoxy, terrazzo and marble
Features
- UHS polish with less odour (fast drying)
- Brilliant gloss under U.H.S. machinery
- Excellent high scratch and abrasion resistance
- Repairs easily, recoats easily, strips easily
- Excellent scuff marks resistance
Directions :
Please read the instructions carefully before applying the wax.
1.Make sure that the floor is thoroughly dry and clean. Floor should have been wet cleaned prior to application of Wax.
2.The wax may be found crumbled if it is stored in cold area other than the workplace i.e. in winter. Thewax must be left at the workplace area for 1-2 hours prior to use.
3.Always use the clean bucket and polycotton mops/applicators.
Coating Process
1.Pour the resin wax into the bucket.
>>* Note: Wax cannot be recycled or reused. Ensure that you pour the exact amount of wax to be used in each process.
2.Take the clean mop and immerse the mop in the bucket. Wring the mop out slightly. Apply a thin coat of wax to the floor. Start applying the floor wax by running the mop parallel to and next to the skirting board. Form a "U” shape section of applied wax. Coat the remaining floor area, inside the "U", using figure "8" stroke. Be sure to cover the entire floor. Allow first coat to dry completely for approximately 1 hour, before applying second and additional coats. Repeat the above instructions for additional coats. More coats allow more protection for the floor and a better appearance.
Coverage : Approx. 1,155m2~1,320m2 per 18.75L
>>* Note Each coat should be dried completely prior to
applying another coat